Pallet Rack PartsPallet Rack Decks and BeamsLight, regular and heavy duty beam configurations available in 36" 991.44 cm), 48" (121.92 cm),, 60" (152.40 cm), 84" (213.36) 96" 243.84 cm), 108" (274.32), 120" (304.80 cm), 132" (335.28) and 144" (365.76 cm). Decking available in unfinished 2" 95.08 cm) dimensional lumber, high density particle board, or wire grid. Pallet Rack UprightsAll Pallet Rack frames feature welded footplates, 2" on center beam adjustment, size availability to 48" wide and 192" high. Sahara or Blue-Gray are standard colors. Frame size should be chosen to allow a minimum pallet overhang of 2" front and 2" rear Pallet Rack Beams and Supports
Pallet Rack Beams are available in three heights for differing load capacities and feature choice of step depths to accommodate either 5/8" particle board decks or 2" dimensional lumber decking. Beams are slotted in the step to accept the correct number of deck supports under decking. Pallet Rack SupportsDeck Supports are formed heavy gauge steel with tabs which fit into beam slots, providing support for regular duty decking or to tie beams together to prevent rotation of beams where heavy duty decking is used. Pallet Rack Grid Decks
Pallet Rack Wood Decks
Economical 5/8" high density particle board for lighter loads or to prevent merchandise from falling. Not recommended where heavy pallets “scrape” the surface. Sealed decks have baked-on polymer wax finish to seal surface. Unfinished 2" dimensional lumber provides high load capacity. Use with ‘-2’ style beams only. Order by frame depth. Pallet Rack Wall Mount
The Pallet Rack Wall Mount Bracket, available in depths of 6", 8", 10" and 12", provides consistent spacing from frame to wall. Hardware pack includes bolts to secure the bracket to the frame. This bracket is not recommended for use when local codes require seismic calculations. Pallet Rack Leveling Shims
Available in 10 packs consisting of five 12 gauge and five 16 gauge shims for use in leveling pallet rack systems. Pallet Rack Lock
Pallet racking integral locking beams and angle floor anchors maintain stability and reduce the chances of possible disengagement. Pallet Rack Floor AnchorsDesigned to meet the needs of most county permit codes. Check your local permit condes, site application to determin your needs. Madix Shelving DividersCompatibale wil most Madix Shelvwes from 12" Deep and up to as deep as 22" Deep. Madix Front Fences available for mos Madix Upper Shelves with the most popular fences at 6' wide and 48" wide. |
(links) |
|
Pallet Rack Parts